dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 1 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 175c n - channel enhancement mode mosfet product summary b v dss r ds(on) max i d max t c = +25c 30v 9 .5 m @ v gs = 10v 55 a 1 1 .5 m @ v gs = 4.5v 50 a description this new generation mosfet has been designed to minimize the on - state resistance (r ds (on ) ) and yet maintain superior switching performance, making it ideal for high efficiency power management applications. applications ? backlighting ? dc - dc converters ? power management functions features ? rated to +175c C ideal for high ambient temperature environments ? 100% unclamped inductive switch (uis) test in production ? low o n - r esistance ? fast s witching s peed ? lead - free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. green device (note 3) ? qualified to aec - q101 standards for high r eli ability mechanical data ? case: to252 (dpak) ? case material: molded plastic, Dgreen molding compound. ul flammability classification rating 94v - 0 ? moisture sensitivity: level 1 per j - std - 020 ? terminal connections: see diagram ? terminals: finish C matte tin finish a nnealed over copper l eadframe. solderable per mil - std - 202, method 208 ? weight: 0. 33 grams ( a pproximate) ordering information (note 4) part number case packaging dm n h 3010lk3 - 13 to252 (dpak) 2500 /tape & reel note s: 1 . eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900 ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http : //www.diodes.com/products/packages.html . marking information equivalent circuit pin out top view top view =manufacturer yyww n h 30 10 l green e3
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 2 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit drain - source voltage v dss 3 0 v gate - source voltage v gss 20 v continuous drain current (note 6 ) v gs = 10v steady state t c = + 25c t c = + 10 0 c i d 55 40 a steady state t a = + 25c t a = + 10 0 c i d 1 5 10. 6 a pulsed drain current ( 10s p ulse, d uty c ycle = 1% ) i dm 100 a avalanche current (note 7 ) l = 0. 8 mh i a s 15 a avalanche energy (note 7 ) l = 0. 8 mh e a s 75 mj thermal characteristics characteristic symbol value unit total power dissipation (note 5 ) p d 2.0 w thermal resistance, junction to ambient (note 5 ) steady state r ja 7 4 c/w t<10s 31 c/w total power dissipation (note 6 ) p d 3.2 w thermal resistance, junction to ambient (note 6 ) steady state r ja 47 c/w t<10s 21 c/w thermal resistance, junction to case (note 6 ) r j c 2.5 c/w operating and storage temperature range t j, t stg - 55 to +1 75 c electrical characteristics ( @ t a = + 25c , unless otherwise specified .) characteristic symbol min typ max unit test condition off characteristics (note 8 ) drain - source breakdown voltage bv dss 30 gs = 0v, i d = 250a dss 1 ds = 30 v, v gs = 0v gate - source leakage i gss 100 n a v gs = 20 v, v ds = 0v on characteristics (note 8 ) gate threshold voltage v gs (th) 1 .0 ds = v gs , i d = 250 a ds(on) 8 9 .5 m gs = 10 v, i d = 18a 10 1 1 .5 v gs = 4 .5v, i d = 16a diode forward voltage v sd 0.75 1.0 v v gs = 0v, i s = 1a dynamic characteristics (note 9 ) input capacitance c iss 2075 pf v ds = 15 v, v gs = 0v , f = 1.0mhz output capacitance c oss 190 reverse transfer capacitance c rss 138 gate r esistance r g 2.4 ds = 0 v, v gs = 0v , f = 1.0mhz total gate charge ( v gs = 4.5 v ) q g 16.1 nc v ds = 15 v, i d = 18 a total gate charge ( v gs = 10 v ) q g 37 gate - source charge q gs 6.1 gate - drain charge q gd 5.9 turn - on delay time t d( on ) 4.5 ns v d s = 15 v, v gs = 10 v, r l = 0.83 gen = 3 r 19.6 turn - off delay time t d( off ) 31 turn - off fall time t f 10.7 reverse recovery time t rr 13.7 ns i f =1 5 a, di/dt=500a/s reverse recovery charge q rr 18.3 n c notes: 5. device mounted on fr - 4 substrate pc board, 2oz copper, with minimum recommended pad layout. 6. device mounted on fr - 4 substrate pc board, 2oz copper, with 1inch square copper plate. 7. i a s and e a s rating s are based on low frequency and duty cycles to keep t j = + 25c . 8 . short duration pulse test used to minimize self - heating effect. 9 . guaranteed by design. not subject to product testing.
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 3 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 i d , drain current (a) v ds , drain - source voltage (v) figure 1. typical output characteristic v gs = 3.0v v gs = 3.5v v gs = 4.0v v gs = 4.5v v gs = 5.0v v gs = 10v 0.004 0.005 0.006 0.007 0.008 0.009 0.01 0.011 0.012 0 5 10 15 20 25 30 r ds(on) , drain - source on - resistance ( ? d , drain - source current (a) figure 3. typical on - resistance vs. drain current and gate voltage v gs = 4.5v v gs = 10.0v 0 0.01 0.02 0.03 0.04 0.05 0 2 4 6 8 10 12 14 16 18 20 r ds(on) , drain - source on - resistance ( ? gs , gate - source voltage (v) figure 4. typical transfer characteristic i d = 18a 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 0 5 10 15 20 25 30 r ds(on) , drain - source on - resistance ( ? d , drain current (a) figure 5. typical on - resistance vs. drain current and temperature v gs = 10v t a = - 55 t a =25 t a =85 t a =125 t a =150 t a =175 0 0.5 1 1.5 2 2.5 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance (normalized) t j , junction temperature ( ( ) figure 6. on - resistance variation with temperature v gs = 10v, i d = 18a v gs = 4.5v, i d = 16a 0 5 10 15 20 25 30 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 i d , drain current (a) v gs , gate - source voltage (v) figure 2. typical transfer characteristic v ds = 5v t a = - 55 t a =25 t a =85 t a =125 t a =150 t a =175
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 4 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance ( ? j , junction temperature ( gs = 4.5v, i d = 16a v gs = 10v, i d = 18a 0 0.5 1 1.5 2 2.5 3 - 50 - 25 0 25 50 75 100 125 150 175 v gs(th) , gate threshold voltage (v) t j , junction temperature ( . gate threshold variation vs. junction temperature i d = 250 a i d = 1ma 0 5 10 15 20 25 30 0 0.3 0.6 0.9 1.2 1.5 i s , source current (a) v sd , source - drain voltage (v) figure 9. diode forward voltage vs. current v gs = 0v t a = - 55 o c t a = 25 o c t a = 85 o c t a = 175 o c t a = 150 o c t a = 125 o c 0 2 4 6 8 10 0 5 10 15 20 25 30 35 40 v gs (v) qg (nc) figure 10. gate charge v ds = 15v, i d = 18a 10 100 1000 10000 0 5 10 15 20 25 30 c t , junction capacitance (pf) v ds , drain - source voltage (v) figure 11. typical junction capacitance f=1mhz c iss c oss c rss 0.1 1 10 100 1000 0.1 1 10 100 i d , drain current (a) v ds , drain - source voltage (v) figure 12. soa, safe operation area t j(max) =175 t c =25 single pulse dut on infinite heatsink v gs =10v r ds(on) limited p w =1s p w =100ms p w =10ms p w =1ms p w =100 s p w =10 s
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 5 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 0.001 0.01 0.1 1 1e - 06 1e - 05 0.0001 0.001 0.01 0.1 1 10 r(t), transient thermal resistance t1, pulse duration time (sec) figure 13. transient thermal resistance r jc (t) = r(t) * r jc r jc = 2.5
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 6 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 package outline dimensions please see ap02001 at http://www.diodes.com/_files/datasheets/ap02001.pdf for the latest version. to252 (dpak) to252 (dpak) dim min max typ a 2.19 2.39 2.29 a1 0.00 0.13 0.08 a2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c 0.45 0.58 0.531 d 6.00 6.20 6.10 d1 5.21 - - e - - 2.286 e 6.45 6.70 6.58 e1 4.32 - - h 9.40 10.41 9.91 l 1.40 1.78 1.59 l3 0.88 1.27 1.08 l4 0.64 1.02 0.83 a 0 10 - all dimensions in mm suggested pad layout please see ap02001 at http://www.diodes.com/_files/datasheets/ap02001.pdf for the latest version. to252 (dpak) dimensions value (in mm) c 4.572 x 1.060 x1 5.632 y 2.600 y1 5.700 y2 10.700 b3 e l3 d l4 b2(2x) b(3x) e c a 7 1 h seating plane a1 gauge plane a 0.508 l 2.74ref d1 a2 e1 x1 x y2 y1 y c
dmn h 3010l k3 document number: ds 38455 rev. 2 - 2 7 of 7 www.diodes.com january 2016 ? diodes incorporated dmn h 3010l k3 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. diodes incorporated does not assume any lia bility arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or pro ducts described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorpora ted does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales chann el. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall i ndemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized ap plication. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. th is document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiven ess. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related re quirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 6 , diodes incorporated www.diodes.com
|
